Flow Rate CalculatorLiquid, gas & engineering tools

Flow rate calculators / Open channels & drainage

Measure flow. Understand the conditions.

Rectangular Critical Depth Calculator

Find the ideal critical depth and critical velocity for a rectangular open channel.

Your flow inputs

m³/s
m

Starting values are illustrative. Check units and assumptions below. Calculate submits your inputs to this site’s result page.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Critical depth = [(Q/width)²/g]^(1/3).

Find the ideal critical depth and critical velocity for a rectangular open channel.

  1. Choose a measurement plane and use compatible units for all inputs.
  2. Obtain appropriate product data or representative measurements for the stated model.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Not a normal-depth or complete hydraulic-jump calculation.

Rectangular Critical Depth calculation: inputs and interpretation

The rectangular relationship follows the critical-flow condition using unit discharge. It is independent of Manning roughness because it represents an energy condition, not a uniform-friction balance. A real control may also involve losses and approach conditions.

Uniform-flow and free-overfall formulas have operating limits. A backwater, hydraulic jump, submerged outlet or inlet-controlled culvert may require a different analysis. Roughness and discharge coefficients are explicit inputs rather than universal material guarantees.

Check the numbers

Rectangular Critical Depth Calculator: calculated examples

These are computed scenarios using the same server calculation as the form. They are not manufacturer ratings or prescribed design values.

Worked example with stated inputs

Discharge = 0.3 m³/s; Rectangular channel width = 1 m.

OutputComputed result
Ideal rectangular critical depth0.209367 m
Critical velocity1.432894 m/s
Minimum specific energy0.31405 m

How one input changes the answer

ScenarioChanged inputResult
0.075 m³/sDischarge0.083087 m
0.15 m³/sDischarge0.131893 m
0.225 m³/sDischarge0.172828 m
0.3 m³/sDischarge0.209367 m
0.45 m³/sDischarge0.274348 m
0.6 m³/sDischarge0.332349 m
0.9 m³/sDischarge0.4355 m

Unchanged inputs use: Discharge = 0.3 m³/s; Rectangular channel width = 1 m. Results retain the model limitations described above.

Common questions

Why is there no slope or Manning n?

Critical depth is based on discharge, geometry and gravity rather than a uniform-resistance balance.

Does this work for trapezoids?

Not directly. Other shapes require solving their own critical-depth condition.

Is minimum specific energy at critical depth?

Under the ideal rectangular hydraulic assumptions, yes.

Can I use it for a full pressure pipe?

No. This is a free-surface rectangular-channel relation.

Which assumptions should I verify?

Check every unit, the observation period and the physical or reference-state boundary stated above. Starting inputs and computed examples are illustrative scenarios, not recommended settings, certified capacities or universal standards.

Where are the formula sources?

Published method and unit references appear at the bottom of this page as plain-text addresses. Computed tables use the same server calculation as the form. No external content-data file is needed at runtime.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, current tariffs or proprietary test results.

  • US DOE Fundamentals Handbook, Thermodynamics, Heat Transfer and Fluid Flow, Volume 3https://www.energy.gov/sites/default/files/2026-04/DOE-HDBK-1012-92_VOL3.pdf
  • US National Weather Service: Normal Depth Demonstration Tool and Manning equationhttps://www.weather.gov/aprfc/normaldepthcalc