Flow Rate CalculatorLiquid, gas & engineering tools

Flow rate calculators / Pumps & water systems

Measure flow. Understand the conditions.

Pool Turnover Flow Calculator

Calculate circulation flow corresponding to a user-selected nominal pool turnover time.

Your flow inputs

L
h

Starting values are illustrative. Check units and assumptions below. Calculate submits your inputs to this site’s result page.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Required nominal flow = pool volume / chosen turnover duration.

Calculate circulation flow corresponding to a user-selected nominal pool turnover time.

  1. Choose a measurement plane and use compatible units for all inputs.
  2. Obtain appropriate product data or representative measurements for the stated model.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Does not certify sanitation, filter sizing, suction safety or code compliance.

Pool Turnover Flow calculation: inputs and interpretation

A nominal turnover exchanges a volume equal to the pool volume through a system; it does not imply every water parcel has passed once. The actual installed flow must be established against the pump and filter system, and the selected duration is not presented as a regulatory minimum.

A pump operates where its curve meets the system curve. The tools here isolate a stated energy, displacement or test relationship; they do not automatically select a pump or verify suction conditions, cavitation margin, protection or installation requirements.

Check the numbers

Pool Turnover Flow Calculator: calculated examples

These are computed scenarios using the same server calculation as the form. They are not manufacturer ratings or prescribed design values.

Worked example with stated inputs

Pool water volume = 50000 L; Chosen nominal turnover duration = 8 h.

OutputComputed result
Nominal turnover flow104.166667 L/min
Volume flow SI0.001736 m³/s
Volume flow hourly6.25 m³/h
US liquid flow27.517922 US GPM
Cubic feet per minute3.678611 CFM

How one input changes the answer

ScenarioChanged inputResult
12500 LPool water volume26.041667 L/min
25000 LPool water volume52.083333 L/min
37500 LPool water volume78.125 L/min
50000 LPool water volume104.166667 L/min
75000 LPool water volume156.25 L/min
100000 LPool water volume208.333333 L/min
150000 LPool water volume312.5 L/min

Unchanged inputs use: Pool water volume = 50000 L; Chosen nominal turnover duration = 8 h. Results retain the model limitations described above.

Common questions

Does an 8-hour turnover mean all water is filtered once?

No. Mixing and recirculation mean nominal volume turnover is not one-pass treatment of every parcel.

Does this select a pool pump?

No. The required flow must be checked against filter limits, piping loss and the actual pump curve.

Can I use US gallons?

Convert to litres using the correct gallon convention before entering volume.

Is the default turnover duration legally required?

No. It is an illustrative planning input.

Which assumptions should I verify?

Check every unit, the observation period and the physical or reference-state boundary stated above. Starting inputs and computed examples are illustrative scenarios, not recommended settings, certified capacities or universal standards.

Where are the formula sources?

Published method and unit references appear at the bottom of this page as plain-text addresses. Computed tables use the same server calculation as the form. No external content-data file is needed at runtime.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, current tariffs or proprietary test results.

  • US Bureau of Reclamation Water Measurement Manual, 2.4: discharge, area and velocityhttps://www.usbr.gov/tsc/techreferences/mands/wmm/chap02_04.html
  • Grundfos: pump curves, head and operating flowhttps://www.grundfos.com/uk/learn/research-and-insights/pump-curves