Flow Rate CalculatorLiquid, gas & engineering tools

Flow rate calculators / Heat & industrial applications

Measure flow. Understand the conditions.

Fuel Flow from Horsepower Calculator

Calculate fuel mass and volume demand from a stated output and brake-specific consumption assumption.

Your flow inputs

mechanical HP
lb/HP/h
kg/L

Starting values are illustrative. Check units and assumptions below. Calculate submits your inputs to this site’s result page.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Fuel lb/h = output HP × BSFC; convert mass to volume using supplied fuel density.

Calculate fuel mass and volume demand from a stated output and brake-specific consumption assumption.

  1. Choose a measurement plane and use compatible units for all inputs.
  2. Obtain appropriate product data or representative measurements for the stated model.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Not a fuel-system selection or tuning instruction; nominal pump ratings may not equal delivered flow at pressure.

Fuel Flow from Horsepower calculation: inputs and interpretation

BSFC must match the engine, fuel and operating condition. It is not a universal engine efficiency constant. Density connects liquid mass and volume at its stated temperature. No reserve or injector duty-cycle requirement is automatically added.

The inputs must describe the actual process boundary. Fluid properties, temperature or enthalpy change and equipment behavior can vary during operation. The displayed equations are preliminary calculations and do not implement proprietary equipment performance maps.

Check the numbers

Fuel Flow from Horsepower Calculator: calculated examples

These are computed scenarios using the same server calculation as the form. They are not manufacturer ratings or prescribed design values.

Worked example with stated inputs

Engine output power = 200 mechanical HP; Assumed brake-specific fuel consumption = 0.5 lb/HP/h; Fuel density = 0.74 kg/L.

OutputComputed result
BSFC-based nominal fuel volume rate61.296266 L/h
Fuel mass100 lb/h
Fuel mass45.359237 kg/h

How one input changes the answer

ScenarioChanged inputResult
50 mechanical HPEngine output power15.324067 L/h
100 mechanical HPEngine output power30.648133 L/h
150 mechanical HPEngine output power45.9722 L/h
200 mechanical HPEngine output power61.296266 L/h
300 mechanical HPEngine output power91.944399 L/h
400 mechanical HPEngine output power122.592532 L/h
600 mechanical HPEngine output power183.888799 L/h

Unchanged inputs use: Engine output power = 200 mechanical HP; Assumed brake-specific fuel consumption = 0.5 lb/HP/h; Fuel density = 0.74 kg/L. Results retain the model limitations described above.

Common questions

Can I convert fuel flow directly to horsepower?

Only with a justified BSFC or another matching energy/performance model.

Is 0.5 lb/HP/h correct for every engine?

No. It is an illustrative editable assumption, not a recommendation.

Does the volume result include a safety margin?

No. It is the nominal supplied-model demand.

Can I use kW?

Convert mechanical output kW to mechanical HP using the stated units before entering it.

Which assumptions should I verify?

Check every unit, the observation period and the physical or reference-state boundary stated above. Starting inputs and computed examples are illustrative scenarios, not recommended settings, certified capacities or universal standards.

Where are the formula sources?

Published method and unit references appear at the bottom of this page as plain-text addresses. Computed tables use the same server calculation as the form. No external content-data file is needed at runtime.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, current tariffs or proprietary test results.

  • US DOE Fundamentals Handbook, Thermodynamics, Heat Transfer and Fluid Flow, Volume 3https://www.energy.gov/sites/default/files/2026-04/DOE-HDBK-1012-92_VOL3.pdf
  • NIST SP 811 Appendix B.9: volume, mass and flow unit factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9