Flow Rate CalculatorLiquid, gas & engineering tools

Flow rate calculators / Gas reference-unit conversions

Measure flow. Understand the conditions.

SCFM to SCFH Converter

Rescale SCFM and SCFH only after confirming the same reference pressure, temperature and dry/wet basis.

Your flow inputs

Starting values are illustrative. Check units and assumptions below. Calculate submits your inputs to this site’s result page.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

At an identical reference gas state: forward factor = 60; reverse factor is its reciprocal.

Rescale SCFM and SCFH only after confirming the same reference pressure, temperature and dry/wet basis.

  1. Choose a measurement plane and use compatible units for all inputs.
  2. Obtain appropriate product data or representative measurements for the stated model.
  3. Submit the form, then interpret the result with the assumptions and limits below.

No reference-state change is performed on this page; use the actual/standard gas tools when pressure, temperature or Z differ.

SCFM to SCFH Converter: inputs and interpretation

Standard and normal flow abbreviations combine a volume unit with a state convention. The geometric/time conversion is valid only when that convention is identical on both sides. For example, Nm³/h at one chosen temperature is not automatically the same state basis as a vendor’s SCFM rating at another temperature.

Use compatible units and verify the measurement basis before interpreting a result.

Check the numbers

SCFM to SCFH Converter: calculated examples

These are computed scenarios using the same server calculation as the form. They are not manufacturer ratings or prescribed design values.

Worked example with stated inputs

Reference volume flow = 1 ; Conversion direction = SCFM to SCFH.

OutputComputed result
Same-basis unit conversion60 SCFH
Applied multiplier60 ratio
Dimension basisreference volume

How one input changes the answer

ScenarioChanged inputResult
0.25 Reference volume flow15 SCFH
0.5 Reference volume flow30 SCFH
0.75 Reference volume flow45 SCFH
1 Reference volume flow60 SCFH
1.5 Reference volume flow90 SCFH
2 Reference volume flow120 SCFH
3 Reference volume flow180 SCFH

Unchanged inputs use: Reference volume flow = 1 ; Conversion direction = SCFM to SCFH. Results retain the model limitations described above.

Common questions

What is the geometric conversion factor?

At the same reference state, multiply SCFM by 60 to obtain SCFH. The reverse direction divides.

Does SCFM have one universal temperature definition?

No. State the reference conditions from the actual specification before comparing values.

Can I convert actual L/min to this standard rate directly?

Not unless actual and reference conditions coincide or a suitable state correction is performed first.

Does this account for humidity?

No. Dry/wet basis and water-vapor content must be made compatible separately.

Does MM mean one thousand here?

In the MMscf/day notation it means one million standard cubic feet per day. Confirm the source’s notation.

Which assumptions should I verify?

Check every unit, the observation period and the physical or reference-state boundary stated above. Starting inputs and computed examples are illustrative scenarios, not recommended settings, certified capacities or universal standards.

Where are the formula sources?

Published method and unit references appear at the bottom of this page as plain-text addresses. Computed tables use the same server calculation as the form. No external content-data file is needed at runtime.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, current tariffs or proprietary test results.

  • NASA Glenn: conservation of mass, ideal gas and compressible nozzle flowhttps://www.grc.nasa.gov/www/k-12/airplane/mflchk.html
  • NIST SP 811 Appendix B.9: volume, mass and flow unit factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9