Flow rate calculators / Flow unit conversions
Measure flow. Understand the conditions.
CFM to m³/s Converter
Convert CFM and m³/s in either direction with explicit volume or mass and time conventions.
Your flow inputs
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Forward result = input × (0.0004719474432/1); reverse uses the reciprocal.
Convert CFM and m³/s in either direction with explicit volume or mass and time conventions.
- Choose a measurement plane and use compatible units for all inputs.
- Obtain appropriate product data or representative measurements for the stated model.
- Submit the form, then interpret the result with the assumptions and limits below.
This converts geometric volume/time units at a matching state; it does not correct gas reference pressure, temperature, density or wet/dry basis.
CFM to m³/s Converter: inputs and interpretation
The SI volume-rate equivalent is useful before applying density, pressure-power or continuity equations. The input unit is defined here as cubic feet per minute; one international foot is exactly 0.3048 metre. The other unit is cubic metres per second, the SI volumetric-rate basis. These definitions prevent an ambiguous abbreviation from silently changing the physical amount.
Use compatible units and verify the measurement basis before interpreting a result.
Continue with: US GPM to US GPH Converter · US GPH to L/h Converter · US GPM to L/min Converter · US GPM to L/s Converter
Check the numbers
CFM to m³/s Converter: calculated examples
These are computed scenarios using the same server calculation as the form. They are not manufacturer ratings or prescribed design values.
Worked example with stated inputs
Flow value = 1 ; Conversion direction = CFM to m³/s.
| Output | Computed result |
|---|---|
| Same-basis unit conversion | 0.000472 m³/s |
| Applied multiplier | 0.000472 ratio |
| Dimension basis | volume |
How one input changes the answer
| Scenario | Changed input | Result |
|---|---|---|
| 0.25 | Flow value | 0.000118 m³/s |
| 0.5 | Flow value | 0.000236 m³/s |
| 0.75 | Flow value | 0.000354 m³/s |
| 1 | Flow value | 0.000472 m³/s |
| 1.5 | Flow value | 0.000708 m³/s |
| 2 | Flow value | 0.000944 m³/s |
| 3 | Flow value | 0.001416 m³/s |
Unchanged inputs use: Flow value = 1 ; Conversion direction = CFM to m³/s. Results retain the model limitations described above.
Common questions
How do I convert CFM to m³/s?
Multiply by 0.0004719474432. The reverse direction divides by that same factor; the selector performs both directions.
What is 1 CFM in m³/s?
Using the explicitly defined units, 1 CFM is 0.0004719474432 m³/s. Displayed decimals are rounded; the calculation retains the underlying unit factors.
Does the numeric conversion establish a device capacity?
No. It expresses a supplied rate in different units and does not determine pump, pipe, fan, meter or treatment suitability.
Do I need density for this conversion?
Not for this same-dimension conversion. Crossing between a mass rate and a volume rate would require an appropriate density.
Can I use an unspecified gallon, barrel or gas standard?
No. Confirm the exact gallon/barrel convention and, for gas volumes, matching reference conditions. The unit labels here are explicit.
Which assumptions should I verify?
Check every unit, the observation period and the physical or reference-state boundary stated above. Starting inputs and computed examples are illustrative scenarios, not recommended settings, certified capacities or universal standards.
Where are the formula sources?
Published method and unit references appear at the bottom of this page as plain-text addresses. Computed tables use the same server calculation as the form. No external content-data file is needed at runtime.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, current tariffs or proprietary test results.
- NIST SP 811 Appendix B.9: volume, mass and flow unit factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9